濟南裝載機http://m.hpize.cn/變速箱是裝載機中重要的配件之一，在裝載機工作過程中，經常出現亂擋或跳擋等現象，裝載機變速箱亂擋或跳擋直接原因是變速閥桿定位不準確，如變速閥桿與閥體內兩只定位鋼球沒有對準人槽或兩只定位鋼球之間的彈簧損壞因而定位錯亂變速操縱桿由于長期受拉、推操縱力的作用桿系，位置或長度發生了變化使操縱位置產生偏差因而造成錯位。
Jinan loader gearbox is one of the important parts loader, loader work in process, often chaotic phenomena such as block or skip, or skip loader gearbox chaos is the direct cause of the shift gear stem positioning is not accurate a shifting the stem and the valve body positioning two balls did not spring damage at a person or two slots positioned between the balls and thus positioning confusion due to the long-standing role in the shift lever pull, push rod system control force, position, or length changes in the position of the manipulator deviations thereby causing dislocation.
   
濟南裝載機http://m.hpize.cn/變速箱跳擋時應該先拆下變速閥桿與操縱桿的連接銷，用手拉動變速閥桿使閥桿處于空擋位置，再將操縱桿手柄扳到空擋位置，最后調整各桿系連接處的位置及改變其長度，并將處于空擋位置的操縱桿手柄和處于空擋位置的變速閥桿重新連接起來。
Jinan loader gearbox should be removed when the jump gear shift lever connecting pin stem and hand speed to pull the stem so that the stem is in the neutral position, and then pull the handle lever to the neutral position, and finally adjust the truss position and change its length, and the handle is in the neutral position and the lever is in the neutral position of the shift reconnect stem junction.